For the calibpoints.dat-file assumes a distance (scale) of 60mm between the calibrationpoints this value is divided by 60.
The resulting factor scales the 3D value of calibpoints.dat up or down
Example: Measured Scale value = 30mm
Measured Value / Assumed Value = 30/60 mm = 0,5
You have to set this value before click on “calbrate” on the
calibration window in DAVID.
Back to top
Please be advised that nothing found here has necessarily been reviewed by people
with the expertise required to provide you with complete, accurate or reliable information.
DAVID-Laserscanner Wiki cannot guarantee the validity of the information found here. The content
of any given article may recently have been changed, vandalized or altered by someone
whose opinion does not correspond with the state of knowledge in the relevant fields.
